HOME
PRODUCTS
ACCESS CONTROL
DESIGN
RESOURCES
DISTRIBUTORS
PROJECTS
MY HAGER
ESTORE
QUICKSHIP
 
 Home > Products > Electrified Solutions > Exit Devices & Trim > 4500 Series Electrified Rim

4500 Series Electrified Rim

Application: - Heavy duty commercial

Certifications: - BHMA Certified ANSI A156.3 Grade 1
- UL 305 Listed for Panic Hardware
- UL/cUL Listed for up to 3 hours for "A" label single doors
- UL10C Positive Pressure Rated
- UL 10B Negative Pressure Rated
- Warnock Hersey listed for up to 3 hours with fire rated removable mullion
- Complies with ANSI A117.1 for accessible buildings and facilities
- ANSI A250.13 Severe Windstorm Resistant Component 
- Miami Dade NOA #11-1219.14


Grade 1 Electrified Rim Exit
Exit Devices & Trim
DateDescriptionDownload

Trim: - Escutcheon trim
- Pull plate trim

Covers: - Stainless steel, zinc

Cover Tube: - Aluminum

End Caps: - Zinc

Door Width: - 36" (914 mm) field sizeable to 30" (762 mm) panic-rated door and 28" (711 mm) fire-rated door for devices with any monitoring switches
- 48" (1219 mm) field sizeable to 36" (914 mm) panic- or fire-rated door for devices with any monitoring switches
- 36" field sizeable to 34" door minimum for devices with motorized electric latch retraction or delayed egress
- 36" door minimum for devices with solenoid electric latch retraction, electric dogging or alarm kit
- 48" field sizeable to 42" door minimum for devices with solenoid electric latch retraction, electric dogging or alarm kit
- 48" field sizeable to 40" door minimum with motorized electric latch retraction or delayed egress

Door Thickness: - 1-3/4" (44 mm) - standard up to 3", except with night latch which is 2-1/2"

Stile Width: - 5-3/8" - Min. stile width required for single doors and standard 5/8" stop
- 5-3/4" - Min. stile width required for double doors and 2" mullion
- 4-7/8" - Min. stile width required for double doors
- All stile widths are measured from door edge

Fasteners: - Wood and machine screws
- Thru-bolts

Latchbolt: - 3/4" throw
- Stainless Steel with dead latch

Strikes: - Steel with plated rollers - Standard
- Overlapping strike for pair of doors
- Surface applied to frame with slotted holes for easy adjustment
- Fire rated strike for use with mullions

Finishes: - US3, US4, US10, US10B, US26, US26D, US32D
- Trim is not available in US32D

Function: - ELR - Electric Latch Retraction
- ED - Electric Dogging
- RX - Request to Exit
- ELRX - Electric Latch Retraction with Request to Exit
- EDRX - Electric Dogging with Request to Exit
- ALK - Alarm Kit
- AI - Authorized Ingress
- LM - Latch Bolt Monitor
- MLR - Motor Driven Electric Latch Retraction (Field Installation Kit 2-649-5007)
- MLRX - Motor Driven Electric Latch Retraction with Request to Exit
DE - Delayed Egress

Electrical Specifications: - ED; .225 AMP @ 24 Volt +/- 2 V
- RX, LM or AI; 125 VAC (3 AMP current); 30 VDC (2 AMP current)
- ELR; requires 2901/2902 power supply
- MLR; 1 AMP in rush @ 24 VDC +/- 2 V
- DE; 430mA @ 24V Single; 680mA @ 24V Tandem

Wire Requirements:  - EL and EU functions require 2 wires for power per device
- Status switches (i.e. RX, LM, etc.) require 2 wires per switch to monitor a normally open (NO) or normally closed (NC) position
- All devices provide 3 wires per switch so both NO and NC positions can be monitored
- Monitoring both positions will require 3 wires per switch

Quick Connect:                          
 
- Available on AI, ED, ELR, LM, MLR, and RX. Compatible with Hager Quick Connect Harness Cables which can plug into Hager hinges with quick connect for quick and accurate wiring of the door. 
Warranty:                                                 - One-year on electrified components
- Lifetime on hardware components

DescriptionFile Number
4500 Series with Rim Cylinder TemplateT-ED00862-Template
4500 Series Rim Template I-ED00043I-ED00043
DescriptionFile Number
12-Wire Harness InstructionsI-CT00098
Motorized ELR Installation InstructionsI-ED01722 Rev 4
Wire Routing/Door Prep InstructionsI-ED00367
Request to Exit Installation InstructionsI-ED00368
Electrified 45ET electric lever instructionsI-ED00370
2902 Installation InstructionsI-EA00002
2901 Installation InstructionsI-EA00001
DescriptionFile Number
Exit Lever OptionsExit Lever Options
ANSI A250.13 - Windstorm Certification 5-2013ANSI A250.13 - Windstorm Certification
UL Listed Fire Rated Exit Hardwarefire-rated-exit-device-listings-10-2017
DescriptionFile Number
Video

Additional product images:

4500 Series Electrified Rim
BHMA CertifiedHandicapUL C/US ListedWarnock C/US
Previous Next