HOME
PRODUCTS
ACCESS CONTROL
DESIGN
RESOURCES
DISTRIBUTORS
PROJECTS
MY HAGER
ESTORE
QUICKSHIP
 
 Home > Products > Electrified Solutions > Exit Devices & Trim > 4600 Series Electrified Narrow Stile Rim

4600 Series Electrified Narrow Stile Rim

Application:  - Heavy duty commercial 
Certifications: - BHMA Certified ANSI A156.3 Grade 1
- UL305 Listed for Panic Hardware
- UL/cUL Listed for up to three hours for “A” label doors
- UL10C Positive Pressure Rated
- UL10B Neutral Pressure Rated

Grade 1 Electrified Narrow Stile Rim
Exit Devices & Trim
DateDescriptionDownload
Trim: 
- Archer, August, William or Withnell lever with escutcheon trim
- Rim cylinder x optional pull

Covers: 
- Stainless steel, zinc

Cover Tube: 
- Aluminum

End Caps: 
- Zinc

Door Width: 
- 36" (914 mm) field sizeable to 30" (762 mm) panic-rated door 
  and 28" (711 mm) fire-rated door for devices with any monitoring switches
- 48" (1219 mm) field sizeable to 36" (914 mm) panic- or fire-rated door 
  for devices with any monitoring switches
- 36" field sizeable to 34" door minimum for devices with 
  motorized electric latch retraction or delayed egress
- 36" door minimum for devices with solenoid electric latch retraction, 
  electric dogging or alarm kit
- 48" field sizeable to 42" door minimum for devices with solenoid electric
  latch retraction, electric dogging or alarm kit
- 48" field sizeable to 40" door minimum with motorized electric 
  latch retraction or delayed egress

Door Thickness: 
- 1-3/4" (44 mm)- Standard

Projection: - 3" (76 mm) in undogged position
- 2-5/8" (67 mm) in dogged position 

Stile Width: 
- 2-1/8" (54 mm) - Minimum stile width required for
 1/2" (13 mm) blade stop frame and 4950 blade stop strike
- 3-1/4" (83 mm) - Minimum stile width required for single door,
5/8"  (16 mm) stop and 4920 standard strike
- 3-3/4" (95 mm) - Minimum stile width required for
double door x  mullion x 4920 strike
- 2-3/4" (70 mm) - Minimum stile width required for double doors
with 2" (51 mm) mullion and 4952 semi-flush mount strike
- All stile widths are measured from door edge

Fasteners: 
- Wood and machine screws
- Thru-bolts

Latchbolt: 
- 3/4" (18 mm) throw, pullman type with automatic
dead-latching, stainless steel

Strikes: 
- Blade stop (4950) - Standard with panic device
- Fire-rated strike (4920F) - Standard with fire-rated device
- Standard strike (4920) - Optional
- Single rabbit strike (4951) - Optional
- Semi-flush mount strike (4952) - Optional

Finishes: 
- US3, US4, US10, US10B, US26, US26D, US32D
- Trim not available in US32D 

Functions:  - ELR - Electric Latch Retraction
- ED - Electric Dogging
- RX - Request to Exit
- ELRX - Electric Latch Retraction with Request to Exit
- EDRX - Electric Dogging with Request to Exit
- ALK - Alarm Kit 
- LM - Latch Bolt Monitor
- MLR - Motor Driven Electric Latch Retraction
(Field Installation Kit 2-649-5007)
- MLRX - Motor Driven Electric Latch Retraction with
Request to Exit
DE - Delayed Egress

Electrical Specifications:  - ED; .225 AMP @ 24 Volt +/- 2 V
- RX or LM; 125 VAC (3 AMP current); 30 VDC (2 AMP current)
- ELR; Requires 2901/2902 power supply  
- MLR; 1 AMP in rush @ 24 VDC +/- 2 V
- DE; 430mA @ 24V Single; 680mA @ 24V Tandem

Wire Requirements:                            - Status switches (i.e. RX, LM, etc.) require 2 wires per switch
 to monitor a normally open (NO) or normally closed (NC) position
- All devices provide 3 wires per switch so both NO and NC positions  can be monitored
- Monitoring both positions will require 3 wires per switch 

Quick Connect:  - Available on ED, ELR, LM, MLR, and RX. Compatible with Hager Quick Connect Harness Cables which can plug into Hager hinges with quick connect for quick and accurate wiring of the door.  
Warranty:  - One-year on electrified components
- Lifetime on hardware components 

Notes: - Recommended to be used on appropriately reinforced doors

DescriptionFile Number
DescriptionFile Number
12-Wire Harness InstructionsI-CT00098
Motorized ELR Installation InstructionsI-ED01722 Rev 4
Wire Routing/Door Prep InstructionsI-ED00367
2902 Installation InstructionsI-EA00002
2901 Installation InstructionsI-EA00001
DescriptionFile Number
4500 and 4600 Series Flush End Cap Installation InstructionsI-ED001887
UL Listed Fire Rated Exit Hardwarefire-rated-exit-device-listings-10-2017
DescriptionFile Number
Video

Additional product images:

4600 Series Electrified Narrow Stile Rim
BHMA CertifiedHandicapUL C/US Listed
Previous Next