HOME
PRODUCTS
ACCESS CONTROL
DESIGN
RESOURCES
DISTRIBUTORS
PROJECTS
MY HAGER
ESTORE
QUICKSHIP
 

8219

Applications:  - For use on interior and exterior non-fire rated outswing or inswing doors
- Standard unit allows for 24 VDC activator, two push plates, and a reactivation sensor
- On-board provisions for door status, battery back up and additional modules
- Operates as a manual closer with or without power

Simultaneous Pair
Low Energy Power Operator
DateDescriptionDownload
Warranty: - One-Year Warranty
Model: - 8219 - Simultaneous Pair
Also Available: - 8218 - Single Operator
- 8221 - Double Egress Simultaneous Pair
Features:  - Non-handed
- Three Operating Modes (On/Off/Hold Open)
- Designed for doors up to 48" wide (1219 mm)
- Designed for doors up to 275 lbs (125 kg)
- Onboard power supply - 115 VAC 60 HZ single phase 5A
   - 0.75A @ 24 VDC Output Standard
   - 1.0A @ 24 VDC Output Optional (w/EDM 2-659-0275)
Operational Functionality: - Power Open Spring Close
- 1/4+HP DC Motor
- Motor Protection Circuit - interrupts motor when there is an obstruction during opening
Programmable Functionality:  - Push and Pull (selectable On/Off)
- Power Assist Close
- Power Boost Close - motor assist under wind and stack pressure
- Motor Hold Close
- Power Open and Hold - for smoke evacuation
- Adjustable Opening Force Limitation
- Adjustable Opening and Closing Speeds
- Adjustable Opening Angle
- Adjustable Hold Open Time for Door Activators (0-60 sec.)
- Sequential Operation (push to open/push to close operation)
- Built-in Safety Circuit w/ Stall/Carpet/Safety
  Slow/Reactivation
    Stall: when door is in motion, most commonly used with pull side
    door mounted sensor, the door stops before contact is made.
    Carpet: used with an overhead presence sensor, keeps a closed
    door closed and an open door open.
    Safety slow: used with a door mounted sensor on pull side,
    opens the door very slowly. 

- Factory Reset
- Optional programming with PIM & iMotion programmer (sold separately)
Certification:  - ANSI A156.19 compliant
- ANSI/UL 325 listed for both United States and Canada
- ADA Compliant
Electrical Specifications: - Power Supply - On-board output (24VDC) for door position status, alarm, etc. 
- Operating Temperature - +5° to 125° F (-15° to 50° C) ambient operating temperature
   in all climatic conditions
- Continuous Sound Level - <70 Db
Mechanical Specifications:  - Dimensions
   Single: 4-9/16” H x 5” W x 31-1/2" L (116 mm x 127 mm x 800 mm)
   Pair: 4-9/16” H x 5” W x 31-1/2" L (116 mm x 127 mm x 800 mm)
  - Header Lengths
   Single: 31.5" (800 mm)
   Single: 39.5" (1003 mm)
   Pair: 75.5" (1198 mm) up to 101.5" (2578 mm)
  - Arms
   Outswing Door Arm - for use with butt hung, offset and center pivot doors
   Telescoping Outswing Door Arm - accomodates door reval from 0" - 9-7/8" (0 mm - 251 mm)
   Optional Deep Reveal Inswing Door Arm and Slide Track - center pivot or double egress doors, 
   0"-6" (0 mm - 152 mm) reveal
  - Outswing Opening Angles: Adjustable (0-110 degrees)
- Inswing Opening Angles: Adjustable (0-110 degrees), Deep Reveal Arm Maximum (90 degrees)
Design Features:  - Internal Adjustable Full Open End Stop
- Lintel Mounted Back Plate - allows for fast and easy installation
- Durable Steel End Plates
Options:  
Modules: - 2-659-0275 Exterior Door Module (EDM) for 8200 Auto Operator
  Provides On-Board Output for 24VDC Electric Strike or Magnetic Lock as with (0.2 – 4.0s) delay
  - 2-659-0276 Multiple Door Module (MDM-B) for 8200 Auto Operator
   Allows for operation of double leaved doors
Programmer:  - 2-659-0277  Programming Interface Module (PIM) for 8200 Auto Operator
  - 2-659-0280 iMotion Programmer w/ 6' Cord
Battery Backup:  - 2-659-0278 Battery Backup with Interface Cable for 8200 Auto Operator
- 2-659-0279 Battery Backup Extension Harness for 8200 Auto Operator
Drive Shaft Arms:
- 2-659-0283 2.65" Drive Shaft Arm (double egress/deep reveal)
- 2-659-0284 3.22" Drive Shaft Arm (standard in & out)
- 2-659-0285 3.94" Drive Shaft Arm (special applications)
- 2-659-0286 4.84" Drive Shaft Arm (double egress out)
- 2-659-0319 Drive Shaft Arm Removal Tool
Arms & Assemblies:
- 2-659-0287 Outswing Door Assembly (0 - 4.1875" reveal) CLR
- 2-659-0288 Outswing Door Assembly (0 - 4.1875" reveal) BLK
- 2-659-0289 Outswing Door Assembly (4.125 - 9.875" reveal) CLR
- 2-659-0290 Outswing Door Assembly (4.125 - 9.875" reveal) BLK
- 2-659-0291 Double Egress Outswing Door Arm Assembly (0 - 4.1875" reveal) CLR
- 2-659-0292 Double Egress Outswing Door Arm Assembly (0 - 4.1875" reveal) BLK
- 2-659-0293 Double Egress Outswing Door Arm Assembly (4.125 - 9.875" reveal) CLR
- 2-659-0294 Double Egress Outswing Door Arm Assembly (4.125 - 9.875" reveal) BLK
- 2-659-0295 Inswing Door Arm and Slide Track (0" reveal) CLR
- 2-659-0296 Inswing Door Arm and Slide Track (0" reveal) BLK
- 2-659-0297 RH Inswing Deep Reveal Arm and Track (0 - 6" reveal) CLR
- 2-659-0298 RH Inswing Deep Reveal Arm and Track (0 - 6" reveal) BLK
- 2-659-0299 LH Inswing Deep Reveal Arm and Track (0 - 6" reveal) CLR
- 2-659-0300 LH Inswing Deep Reveal Arm and Track (0 - 6" reveal) BLK
Finishes: - ALM Aluminum anodized (standard)
- DBZ Dark bronze anodized

 
DescriptionFile Number
DescriptionFile Number
Outswing, 0"-10" Reveal, Center PivotS-CL00746 - Mounting Drawing
Inswing, 0-6" Reveal, Center PivotS-CL00744 - Mounting Drawing
Inswing, 0" Reveal, Butt HingeS-CL00740 - Mounting Drawing
Outswing, 0"-10" Reveal, Butt HingeS-CL00742 - Mounting Drawing
8200 Installation Instructions8200 Installation Instructions
DescriptionFile Number
8200 Auto Operator Ordering FormI-CL00706-Rev2
Low Energy Operator ChecklistLow Energy Operator Checklist
8200 Owner's Manual8200 Owner's Manual
DescriptionFile Number
Video
Previous Next
  • Divider Line
    8218
    Single Operator
    Low Energy Power Operator
  • Divider Line
    8221
    Double Egress Simultaneous Pair
    Low Energy Power Operator