HOME
PRODUCTS
ACCESS CONTROL
DESIGN
RESOURCES
DISTRIBUTORS
PROJECTS
MY HAGER
ESTORE
QUICKSHIP
 

8221

Double Egress Simultaneous Pair
Low Energy Power Operator
DateDescriptionDownload
WARRANTY One-Year Warranty
   
MODEL  
8221 Double Egress Simultaneous Pair
   
Also Available  
8218 Single Operator
8219 Simultaneous Pair
   
APPLICATION  • For use on interior & exterior non-fire rated outswing or 
  inswing doors
  • Standard unit allows for 24VDC activator, two push plates, 
  and a reactivation sensor
  • On-board provisions for door status, battery backup and 
   additional modules
  • Operates as a manual closer with or without power
   
FEATURES  
Application Features: • Non-Handed
  • Three Operating Modes (On/Off/Hold Open)
  • Designed for doors up to 48" wide (1219 mm)
  • Designed for doors up to 275 lbs. (125 Kg)
  • On-Board power supply - 115 VAC 60 HZ single phase 5A 
      - 0.75A @ 24VDC Output Standard
    - 1.0A @ 24VDC Output Optional (w/ EDM 2-659-0275)
   
Operational Functionality: • Power Open Spring Close
  • 1/4+ HP DC Motor
  • Motor Protection Circuit - interrupts motor when there is 
   an obstruction during opening
   
Programmable Functionality: • Push and Pull (selectable On/Off)
  • Power Assist Close
  • Power Boost Close - motor assist under wind and 
  stack pressure
  • Motor Hold Close
  • Power Open and Hold - for smoke evacuation
  • Adjustable Opening Force Limitation
  • Adjustable Opening and Closing Speeds
  • Adjustable Opening Angle
  • Adjustable Hold Open Time for Door Activators (0 - 60 sec.)
  • Sequential Operation (push to open/push to close operation)
  • Built-In Safety Circuit w/ Stall/Carpet/Safety 
  Slow/Reactivation
     - Stall: when door is in motion, most commonly used with 
      pull side door mounted sensor, the door stops before contact 
      is made.
      - Carpet: used with an over head presence sensor, keeps a closed
       door closed and an open door open.
      - Safety slow: used with a door mounted sensor on pull side, 
       opens the door very slow.
  • Factory Reset
   • Optional programming with PIM &
    iMotion programmer (sold separately)
   
Certification: • ANSI A156.19 compliant
  • ANSI/UL 325 listed for both United States and Canada
  • ADA compliant
   
ELECTRICAL SPECIFICATIONS  
Power Supply: On-board output (24VDC) for door position status, alarm, etc.


Operating Temperature:
+5° to 125° F (-15° to 50° C) ambient operating temperature
 in all climatic conditions

   
Continuous Sound Level:  <70 Db 
   
MECHANICAL SPECIFICATIONS  
Dimensions: Single: 4-9/16” H x 5” W x 31-1/2" L 
(116 mm x 127 mm x 800 mm)
  Pair: 4-9/16” H x 5” W x 75-1/2" L 
(116 mm x 127 mm x 1816 mm)
   
Header Lengths: • Single: 31.5" (800 mm)
  • Single: 39.5" (1003 mm)
  • Pair: 75.5" (1198 mm) up to 101.5" (2578 mm)
   
Arms: • Outswing Door Arm - for use w/ butt hung, offset and center
  pivot doors
  • Telescoping Outswing Door Arm - accommodates door reveal
  from 0”- 9-7/8” (0 mm - 251 mm)
  • Inswing Door Arm and Slide Track - for use w/ butt hung, 
  offset pivot doors (0") reveal
  • Optional Deep Reveal Inswing Door Arm and Slide Track - 
  center pivot or double egress doors, 0"- 6” (0 mm - 152 mm) reveal


Opening Angles - Outswing: Adjustable (0-110 degrees)


Opening Angles - Inswing:  Adjustable (0-110 degrees); Deep Reveal Arm Maximum (90 degrees)
   
Design Features: • Internal Adjustable Full Open End Stop
  • Lintel Mounted Back Plate - allows for fast and easy installation
  • Durable Steel End Plates
   
OPTIONS  
Modules:  
2-659-0275 Exterior Door Module (EDM) for 8200 Auto Operator
  Provides On-Board Output for 24VDC Electric Strike or 
Magnetic Lock as with (0.2 – 4.0s) delay
   
2-659-0276 Multiple Door Module (MDM-B) for 8200 Auto Operator
  Allows for operation of double leaved doors
Programmer:  
2-659-0277 Programming Interface Module (PIM) for 8200 Auto Operator
2-659-0280 iMotion Programmer w/ 6' Cord
   
Battery Backup:  
2-659-0278 Battery Backup with Interface Cable for 8200 Auto Operator
2-659-0279 Battery Backup Extension Harness for 8200 Auto Operator
   
Drive Shaft Arms:  
2-659-0283 2.65" Drive Shaft Arm (double egress/deep reveal)
2-659-0284 3.22" Drive Shaft Arm (standard in & out)
2-659-0285 3.94" Drive Shaft Arm (special applications)
2-659-0286 4.84" Drive Shaft Arm (double egress out)
2-659-0319 Drive Shaft Arm Removal Tool 
   
Arms & Assemblies:  
2-659-0287 Outswing Door Assembly (0 - 4.1875" reveal) CLR
2-659-0288 Outswing Door Assembly (0 - 4.1875" reveal) BLK
2-659-0289 Outswing Door Assembly (4.125 - 9.875" reveal) CLR
2-659-0290 Outswing Door Assembly (4.125 - 9.875" reveal) BLK
2-659-0291 Double Egress Outswing Door Arm Assembly 
(0 - 4.1875" reveal) CLR
2-659-0292 Double Egress Outswing Door Arm Assembly 
(0 - 4.1875" reveal) BLK
2-659-0293 Double Egress Outswing Door Arm Assembly 
(4.125 - 9.875" reveal) CLR
2-659-0294 Double Egress Outswing Door Arm Assembly 
(4.125 - 9.875" reveal) BLK
2-659-0295 Inswing Door Arm and Slide Track (0" reveal) CLR
2-659-0296 Inswing Door Arm and Slide Track (0" reveal) BLK
2-659-0297 RH Inswing Deep Reveal Arm and Track (0 - 6" reveal) CLR
2-659-0298 RH Inswing Deep Reveal Arm and Track (0 - 6" reveal) BLK
2-659-0299 LH Inswing Deep Reveal Arm and Track (0 - 6" reveal) CLR
2-659-0300 LH Inswing Deep Reveal Arm and Track (0 - 6" reveal) BLK
   
FINISHES  
ALM Aluminum anodized (standard)
DBZ Dark bronze anodized
DescriptionFile Number
DescriptionFile Number
R.H. Inswing, R.H. Outswing, Center PivotS-CL00754 - Mounting Drawing
R.H. Inswing, R.H. Outswing, Butt HingeS-CL00752 - Mounting Drawing
8200 Installation Instructions8200 Installation Instructions
DescriptionFile Number
8200 Auto Operator Ordering FormI-CL00706
Low Energy Operator ChecklistLow Energy Operator Checklist
8200 Owner's Manual8200 Owner's Manual
DescriptionFile Number
Video
Previous Next
  • Divider Line
    8218
    Single Operator
    Low Energy Power Operator
  • Divider Line
    8219
    Simultaneous Pair
    Low Energy Power Operator