HOME
PRODUCTS
ACCESS CONTROL
DESIGN
RESOURCES
DISTRIBUTORS
PROJECTS
MY HAGER
ESTORE
QUICKSHIP
 

790-906

Certification: - ANSI A156.26 Grade 1 for 150-pound doors

Material: - 14 Ga. (0.075'' = 1.9 mm) Type 304 Stainless Steel

Finish: - US32D Satin

Door of Any Material
Half Mortise
DateDescriptionDownload
Clearance: - 1/8" (3.2 mm) minimum hinge side
- Plus standard lockside clearance

Fasteners: - #10-24 x 5/8" S/S Dril-Kwik (R) (metal frame)
- #1/4-20 x 3/4" 2C Dril-Kwik (R) (metal door)
- #1/4-14 x 1'' 2C Type AB (wood frame)

Length Options: - Standard

Door Reinforcement: - None required

Frame Reinforcement: - None required to 200 lbs. Heavier weight use 16-gauge channel.

Fire Rating: - Up to 3 hr. metal and 90 min. wood composite

Special Features: - 1/4" (6.3 mm) diameter Stainless Steel Pin
- Dual 6/6 Nylon bearings between each knuckle
- For square edge doors only. Not recommended for doors with beveled edge on the hinge side.
- Door Edge protection lip stop side only
- Security molding

 Note:  - Any nonstandard length hinge may require a custom hole pattern based on the requested length. Consult Hager Companies to address the field prep for the doors and frames. 
Length (inches) Length (cm) Screws (Door) Screws (Jamb)
79 200.7 19 13
83 210.8 21 14
85 215.9 21 14
95 241.3 23 15
119 302.3 27 18
DescriptionFile Number
Model 790-906 - Continuous Stainless Steel Hinge - 119" - Template74698034
Model 790-906 - Continuous Stainless Steel Hinge - 95" - Template74698033
Model 790-906 - Continuous Stainless Steel Hinge - 85" - Template74698032
Model 790-906 - Continuous Stainless Steel Hinge - 83" - Template74698031
Model 790-906 - Continuous Stainless Steel Hinge - 79" - Template74698030
DescriptionFile Number
790-904, 906 Installation Instructions75009404
DescriptionFile Number
DescriptionFile Number
Video

Additional product images:

790-906 790-906
UL C/US Listed
Previous Next
  • Divider Line
    790-904
    Door of Any Material
    Half Mortise